20% Solids Clear Exterior Concrete Sealer

 20% Solids Clear
Exterior Concrete Sealer

Stain Protection Clear Sealer for Outdoor Concrete

 20% Solids Clear Exterior Concrete Sealer

Durável clear concrete sealers for natural and colored concrete, stamped concrete, and decorative overlay. Superior protection from UV rays, deicing products, and staining.

Durável clear exterior concrete sealers for natural and colored concrete, stamped concrete, and decorative overlay. Superior protection from UV rays, deicing products, and staining. Durável concrete sealers are formulated using the latest technology in pure acrylics with advanced adhesion promotors for extended service life. Protect concrete driveways, walkways, patios, porches, balconies, and other surfaces from common stains and chemical attack.

Typical Uses
Crystal clear concrete sealer to protect
Natural concrete and overlays
Driveways, walks and patios
Porches and balconies
Commercial and residential concrete

Product Advantages
UV-stable pure acrylics
Superior bond to concrete and overlay
Protection from stains and chemicals
Resists salts, acidic stains, and other damage

MIXING INSTRUCTIONS 

DV-20 is a single component solvent acrylic sealer. Material should be stirred well prior to application. Long term storage may allow material to separate.

APPLICATION INSTRUCTIONS 

Rolling
DV-20 may be rolled using a 1/2″ or 3/4″ nap roller with a solvent resistant core. Select a nap length appropriate to not leave excess sealer in low parts of the concrete texture. Application should be two thin coats that are not allowed to puddle in low spots of texture. Sealer may be applied directly from the bucket, or a roller tray.

Spraying
Application may also be done using a solvent resistant sprayer designed for this use; back roll as needed to remove excess sealer in low parts of the concrete texture. For best results, use a .5 GPM tip with plenty of air pressure in the tank to create an even dispersion of the sealer. Maintain a wet edge between passes to limit lap lines. Sealer should be applied in thin coats.

Cured Physical Properties

 Re-coat……………………………………………. 2 to 24 hours
Flash point (tag closed cup) ………………. 65 °F (18 °C)
Solvent resistance…………………………….. minimal

Typical Data at 75 degrees

Dry to touch ………………………………………….. 25-60 minutes
Foot traffic ……………………………………………. 24 hours
Vehicle traffic …………………………………….  4-5 days
VOC content………………………………………….. <600 g/L or <400 g/L


Contact Durável:



 20% Solids Clear Exterior Concrete Sealer

 5 Gallon and 1 Gallon UV Stable Exterior Concrete Sealers

1 Gallon  20% Solids Clear Exterior Concrete Sealer
 20% Solids Clear Exterior Concrete Sealer

Duravel Clear Concrete Acrylic Sealers and Cure and Seal