5 Gallon  30% Solids Clear Exterior Concrete Sealer

30% Solids Clear Acrylic Concrete Sealer

30% Solids Methyl-Methacrylate Acrylic Clear Concrete Sealer

5 Gallon  30% Solids Clear Exterior Concrete Sealer

Durável DV-30 is a High-Performance Silane 30% solids Methyl-Methacrylate Acrylic clear concrete sealer providing excellent color enhancement with a non-yellowing crystal-clear finish. DV-30 is high gloss, color enhancing and formulated using the latest technology for superior bond to concrete and overlay.

The addition of an Advanced Silane Composition promotes adhesion, increases mar resistance, and makes recoating easier. Pure Methyl-Methacrylate Acrylics protect concrete against damaging effects of UV rays, traffic, weather, deicing salts as well as improving stain resistance from many chemicals. Use DV-30 on natural and colored concrete, stamped concrete, and decorative overlay. It is vapor permeable yet reduces the penetration of fluids into the surface. DV-30 will enhance the beauty of concrete, improve stain and abrasion resistance, and provide protection for driveways, walkways, patios, porches, balconies, and other surfaces from common stains and chemical attack. Also available in 400 g/L VOC formula.

Typical Uses

  • Natural Concrete and Overlays
  • Driveways, Walks and Patios
  • Porches and Balconies
  • Commercial and Residential Concrete

Product Advantages

  • UV-Stable Pure Acrylics
  • Superior Bond to Concrete and Overlay
  • Protection from Stains and Chemicals
  • Resists Salts, Acidic Stains, and other Damage

Mar Resistant High Gloss Finish

MIXING INSTRUCTIONS 

DV-30 is a single component solvent acrylic sealer. Material should be stirred well prior to application. Long term storage may allow material to separate.

APPLICATION INSTRUCTIONS 

DV-30 may be rolled using a 1/2″ or 3/4″ nap roller. Select a nap length appropriate to not leave excess sealer in low parts of the concrete texture. Application may also be done using a solvent resistant sprayer designed for this use; back roll as needed to remove excess sealer in low parts of the concrete texture. Sealer should be applied in thin coats.

Cured Physical Properties

Re-coat……………………………………………. 2 to 24 hours
Flash point (tag closed cup) ………………. 65 °F (18 °C)
Solvent resistance…………………………….. minimal

Typical Data at 75 degrees
Dry to touch ………………………………………. 25-60 minutes
Foot traffic ………………………………………… 24 hours
Vehicle traffic ……………………………………. 4-5 days
VOC content……………………………………… <600 g/L or <400 g/L
Adhesion to concrete………………………….. excellent
Resistance to yellowing from UV exposure… excellent
Solids content……………………………………… 30% by volume
Low concrete or air temperature and/or high relative humidity will extend drying time.


Contact Durável:



1 and 5 Gallons  30% Solids Clear Exterior Concrete Sealer

1 Gallon 30% Solids Clear Exterior Concrete Sealer
5 Gallon  30% Solids Clear Exterior Concrete Sealer

Duravel Clear Concrete Acrylic Sealers and Cure and Seal