Clear Water-Base Acrylic Concrete Sealer - DV-WB™

Durável DV-WB is a single-component, crystal-clear water-based acrylic penetrating concrete sealer formulated with high-performance acrylic technology. It is designed to protect and enhance interior and exterior natural concrete, decorative concrete, and cement-based overlay systems.

DV-WB provides excellent adhesion, abrasion resistance, chemical resistance, and protection against common stains and deicing products. Its durable formula also helps resist hot-tire pickup, making it a dependable clear concrete sealer for residential, commercial, and light industrial applications.

DV-WB™ Water-Based Clear Sealer Quick Facts

  • Solids Content: 29% +/- by weight
  • Dry Time, Tack Free: 1 to 2 hours
  • Dry Time, Foot Traffic: 24+ hours
  • Dry Time, Heavy Traffic: 48 hours
  • Dry Time, Vehicular: 4 – 5 Days
  • Recoat Interval: 4 to 24 hours
  • Application Temperature: Substrate 50° to 80° F
  • VOC Content: < 150 g/L

Water Based Low Voc Clear Sealer for interior and exterior concrete

DV-WB™ Water-Based Clear Sealer Quick Facts

  • Solids Content: 29% +/- by weight
  • Dry Time, Tack Free: 1 to 2 hours
  • Dry Time, Foot Traffic: 24+ hours
  • Dry Time, Heavy Traffic: 48 hours
  • Dry Time, Vehicular: 4 – 5 Days
  • Recoat Interval: 4 to 24 hours
  • Application Temperature: Substrate 50° to 80° F
  • VOC Content: < 150 g/L

Why Use Durável DV-WB™ Water Base Acrylic Concrete Sealer

Durável DV-WB is a crystal-clear water-based acrylic concrete sealer designed to protect and enhance both interior and exterior concrete surfaces. It can be applied to natural concrete, decorative concrete, and cement-based overlays to improve appearance while providing durable resistance to abrasion, common stains, chemicals, deicing products, and hot-tire pickup.

The vapor-permeable formula allows moisture vapor to pass through the coating, helping it perform reliably on properly prepared concrete without trapping unnecessary moisture beneath the sealer. Its clear finish protects the natural appearance and decorative character of the surface while providing long-term protection against traffic, wear, and routine maintenance.

DV-WB is also an excellent choice for grind-and-seal concrete flooring systems. It can be applied to open concrete slabs in warehouses, storage facilities, utility spaces, commercial interiors, and other areas where a durable, easy-to-maintain clear finish is needed. The single-component, water-based formula offers straightforward application and dependable performance for residential, commercial, and light industrial projects.

Water Based Low Voc Clear Sealer for interior and exterior concrete
Duravel DV-WB water based clear acrylic concrete sealer in single gallon can
DV-WB acrylic concrete sealer in low odor water base formula five gallon pail

How to use DV-WB™ Clear Water-Based Acrylic Concrete Sealer:

ALWAYS READ FULL TDS AND SDS BEFORE APPLYING DV-WB™

Coverage:

First coat: varies with substrate porosity, typically 180 – 220 sq ft per gallon 
Second Coat: 200 – 240 sq ft per gallon 

Coverage rates can vary greatly depending on surface porosity and the application method. Avoid applying DV-WB too thick. The first coat may look blotchy or uneven because of differences in the surface porosity. Always apply a second coat for proper appearance, coverage, and protection.

DV-WB is designed to be applied in thin coats. One thick coat will not be as durable as two thin coats.

Application Instructions:

ALKALINITY: The prepared concrete surface must be at a neutral pH, measuring between 8.0 and 9.5. Use a pH pencil for the most accurate surface pH reading. If the surface pH is above 9.5, use Durável ECP to lower the pH into the acceptable range. Follow the directions on the ECP technical data sheet. If the surface pH is below 8.0, use an ammonia or baking soda solution to raise the pH into the acceptable range.

DV-WB must be applied over a dry surface. Natural concrete must cure for at least 28 days before application. Cement overlays vary, so they must be dry according to the recommendations in their technical data sheet.

Choose the roller nap based on the surface texture. Use a thicker nap on rough or contoured surfaces to help coat the profile without leaving puddles in low areas.

Use:

  • 1/2″ to 3/4″ nap roller on rough or textured surfaces.
  • 1/4″ to 3/8″ nap roller on smooth surfaces.

Always apply DV-WB in thin coats to maximize coating strength and durability. DV-WB may be applied directly from the bucket or from a roller tray. For even product distribution and to reduce roller lines, cross-roll the wet surface during application.

When using an airless sprayer, the unit should have a minimum discharge capacity of 0.5 gpm. Use a .015″ to .019″ tip with a 65° fan pattern. For best results, spray consistent passes while maintaining a wet edge. Use a wand extension when needed to keep the spray even, perpendicular to the surface, and within 12 inches of the surface.

Clean Up:

Clean tools, sprayers, and mixing vessels with soap and water.

© 2026 All Rights Reserved.

Typical Uses for DV-WB Water Base Concrete Sealer

  • Patios, entrances, concrete decks, and balconies
  • Driveways, sidewalks, and walkways
  • Warehouse floors and grind-and-seal concrete systems
  • Commercial, industrial, and residential concrete surfaces
  • Interior and exterior natural concrete and cement-based overlays

Advantages of DV-WB Acrylic Concrete Sealer

  • Crystal-clear, UV-stable finish that protects concrete without hiding its natural appearance
  • Long-lasting performance for interior and exterior concrete surfaces
  • Superior penetration, adhesion and film strength for dependable resistance to traffic and wear
  • Low-odor, low-VOC water-based formula for easier use in residential, commercial, and industrial environments

Tips and Precautions

Weather

Check the forecast before applying sealer. The surface should stay dry for 24 hours before sealer application and for at least 12 hours after the work is complete. Turn off sprinkler systems during application and keep them off for at least 24 hours after application.

Additives

When using a low slip additive in the sealer, take care to reduce roller lines. Applying sealer when the surface is cooler will increase the working time of the coating and allow more time for cross-rolling. Cross-rolling helps spread the anti-slip material more evenly, creating a more consistent finish.

Edging

When applying a coating, trimming and edging should be done while the main surface is being rolled, not ahead of time. Maintain a wet edge as you work so the sealer blends together evenly. If the cut-in areas are done too far in advance, they may dry before the surface coat is rolled. This can create double coating in those areas, which may cause color and sheen differences.

Thin to Win!

Thin to Win! Applying sealer in two thin coats will produce the best results. Follow the coverage guidelines in the technical data sheet for each sealer. However, the actual coverage will depend on the condition and porosity of the surface. Soft or very porous surfaces will use much more sealer than tight, smooth surfaces.

Recoating

When recoating over an existing sealer, always test for compatibility between the old sealer and the new sealer. The best practice is to place a paper towel in an inconspicuous area and pour a small amount of xylene over it. After 1–2 minutes, use a gloved finger to move the xylene around on the surface and watch how the existing coating reacts. If the coating turns into a curdled mess and crumbles off the surface, it is most likely a water-based sealer. It should only be recoated with a fresh water-based sealer.

If the existing coating wets out and can be moved around with your fingers, check to see if it becomes tacky. The test area should return to its original appearance as it dries. This indicates the coating is most likely a solvent-based sealer and can be recoated with a fresh solvent-based sealer.

If the test area is not affected and only becomes cleaner, with no coating material removed, the existing coating is most likely a two-component product. It should not be recoated with a single-component sealer.

Low VOC Clear Outdoor Clear Concrete Sealer pictures

Durável DV-WB™ water-based clear acrylic concrete sealer

Durável DV-WB™ is a professional water-based clear acrylic concrete sealer designed to protect natural concrete, decorative concrete, and cement-based overlays in interior and exterior applications. Its single-component formula dries to a crystal-clear, UV-stable finish that preserves the natural appearance of concrete while providing durable protection against traffic, abrasion, common stains, chemicals, deicing products, and everyday wear.

High performance water base acrylic concrete sealer

Engineered with high-performance acrylic technology, DV-WB delivers excellent adhesion and film strength on properly prepared concrete surfaces. The durable coating helps resist hot-tire pickup, making it a dependable water-based driveway sealer for garages, driveways, parking areas, and other surfaces exposed to vehicle traffic. Its abrasion resistance also makes it well suited for commercial and light industrial environments where long-term durability and easy maintenance are important.

Breathable concrete sealer

DV-WB is vapor permeable, allowing moisture vapor to pass through the coating while helping reduce the penetration of liquids and contaminants into the concrete. This balance makes it an effective breathable concrete sealer for patios, sidewalks, walkways, entrances, balconies, concrete decks, and other indoor or outdoor surfaces. The non-yellowing clear finish protects the concrete without hiding decorative color, texture, or natural surface variation.

Low-odor water base sealer for concrete

The low-odor, low-VOC water-based formula makes DV-WB an excellent choice for occupied interiors and enclosed spaces where strong solvent odors may be undesirable. Contractors can use it on residential floors, retail spaces, storage facilities, warehouses, utility areas, and commercial concrete floors requiring a clean, durable, and easy-to-maintain finish.

Concrete Grind and Seal

Durável DV-WB is also an ideal grind-and-seal concrete floor sealer for open slab surfaces. After the concrete has been properly ground and prepared, DV-WB creates a clear protective finish that enhances the floor while improving resistance to dust, stains, abrasion, and routine traffic. It is especially useful for warehouse flooring, storage units, stockrooms, workshops, and other functional concrete spaces.

Typical applications for water base concrete sealer

Typical applications include patios, entrances, driveways, sidewalks, balconies, concrete decks, warehouse floors, commercial interiors, industrial spaces, residential concrete, and decorative cement overlays. Whether used as an interior concrete sealer, exterior concrete sealer, warehouse floor sealer, or clear sealer for concrete overlays, DV-WB provides dependable protection with straightforward single-component application.

For contractors searching for a low-odor concrete sealer, low-VOC acrylic sealer, chemical-resistant concrete sealer, abrasion-resistant floor sealer, or water-based sealer for grind-and-seal floors, Durável DV-WB offers a versatile combination of clarity, adhesion, vapor permeability, durability, and long-term concrete protection.