Concrete Sealer Gloss Reduction Powder – Durável D-Matte™
Durável D-Matte™ is a micronized gloss-reduction powder designed to lower the sheen of clear concrete sealers and floor coatings. Unlike many conventional matting agents, D-Matte is compatible with both solvent-based and water-based systems, giving contractors greater flexibility when creating satin or matte concrete finishes.
D-Matte blends easily into compatible sealers and coatings and remains suspended with minimal additional stirring. Its fine particle size helps produce a consistent, uniform reduction in gloss without compromising the clarity or decorative appearance of the finished surface.
D-Matte™ Quick Facts
- Reduce Gloss in Clear Coatings
- Use With Both Solvent and Water-Base Coatings
- Mixes Easily and Stays Suspended
- Adjustable Gloss Reduction
- Packaged in One Pound Jars
Request More Information



Reduce the sheen of clear concrete sealers
Durável D-Matte™ is a micronized gloss-reduction powder formulated to lower the sheen of compatible clear concrete sealers and floor coatings. It gives contractors greater control over the finished appearance, making it possible to reduce a high-gloss surface to a softer satin or matte finish while preserving the clarity and decorative character of the concrete below.
Gloss reduction powder for water base and solvent base coatings
Unlike many conventional matting agents that are limited to one coating type, D-Matte is compatible with both solvent-based and water-based sealer systems. The fine powder mixes easily into the coating and remains evenly suspended with only minimal additional stirring, helping produce a consistent sheen across the entire surface. D-Matte is an ideal choice for projects where a lower-gloss, more natural-looking concrete finish is preferred without changing the protective performance of the selected sealer.
How to use D-Matte™ Gloss Reduction Powder
© 2026 All Rights Reserved.
ALWAYS READ FULL TDS AND SDS BEFORE USING D-Grip Matte™:
Coverage:
For typical gloss reduction add one full pound of D-Matte to five gallons of clear coating. For additional gloss reduction add up to one additional pound.
Mixing Instructions:
Shake container before opening. Using a ribbon mixer, slowly blend D-Matte into the selected top coat, being careful to not introduce air into the mixture. When working from a paint tray stir product before refilling the tray.
D-Matte is not recommended for use with two-component products.
Application Instructions:
When using a roller pan, make sure to roll along the bottom and edges of the roller tray each time. This action will help keep the material in suspension and evenly distributed on the roller nap surface. Roll sealer or coating per that product’s TDS instructions. D-Matte is intended to be blended thoroughly in the topcoat prior to application. DO NOT attempt to broadcast D-Matte.