D-Grip™

Slip Resistance Additive

D-Grip micronized polymer traction additive provides increased slip-fall protection when added to a range of solvent base concrete floor coatings. There are three sizes: D-Grip (40 mesh), D-Grip Fine (100 mesh) and D-Grip HD (16 mesh). Unlike typical polypropylene products, the clear polymer of D-Grip does not significantly reduce the gloss or color of sealer. D-Grip mixes easily into solvent sealers and stays suspended with minimal additional stirring.

TDS DOWNLAOD

SDS DOWNLOAD

TYPICAL USES of D-Grip™

Available in three sizes:

D-Grip Fine: Fine 100 mesh

D-Grip: Standard 40 mesh

D-Grip HD: Heavy Duty 16 mesh

Provides safe slip-fall protection on:

Swimming Pool Decks
Driveways and Sidewalks
Stamped Concrete
Patios and Garages
Other Interior and Exterior Surfaces

PRODUCT ADVANTAGES of D-Grip™

Mixes Easily and Stays Suspended
Only Slight Loss of Gloss
Range of Sizes

MIXING INSTRUCTIONS

Blend up to six ounces of D-Grip per gallon of solvent base sealer or coating. Stir well without introducing air into the product. In larger volume, it may be necessary to stir occasionally during application.

APPLICATION INSTRUCTIONS

Roll sealer or coating per that product’s TDS instructions. If used in conjunction with water base product it is recommended to broadcast D-Grip into the wet coating and backroll to encapsulate the additive.